View Single Post
Old 06-23-2011, 04:49 AM   #19 (permalink)
Heihetech
EcoModding Lurker
 
Join Date: May 2011
Location: SAN JOSE, CA
Posts: 76
Thanks: 12
Thanked 5 Times in 5 Posts
Thumbs up Dynamic Cylinder Deactivation Could be a Good Solution to This Thread

Dynamic Cylinder Deactivation(DCD) Could be a Good Soltion to This Thread.

I installed DCD Controller in my 4-cylinder 1.6L AT vehicle like Chevy Aveo,
and tested it in stop-and-go mode around the city block, yielding some 10%
to 13% fuel savings. DCD reduces the engine displacement as well as the
engine power when you don't need too much power during city-driving mode,
resulting a limited accelaration when you start from stop. Such kind of saving
is even larger than that of driving under steady speed, which is around 5% to
9%. So DCD could be best suitable for city-driving. Trying is believing. I have
made a 4-cylinder engineering sample called DCD-440 for you guys to try.

Last edited by Heihetech; 06-23-2011 at 05:00 AM..
  Reply With Quote