Quote:
Originally Posted by vacationtime247
The biggest obstacle with converting it over to a manual is the clutch pedal. There are after market companies that sell a kit, but it's insanely expensive.
|
Nah, not on a B body
I found i good clutch pedal for B-bodies - Chevrolet Impala SS Forum : Chevy Impala SS Forums
As long as you have the skill to mess with a little sheetmetal and preferably a junk vehicle or U-pull it place nearby it shouldn't be real bad, just remember it doesn't have to be BEAUTIFUL, just functional, if you don't mind the brake and clutch a little close and a funny looking pedal your golden.
I also strongly recommend starting a thread on thedieselplace.com, many members there have done various auto to manual swaps with 6.2s and can give good recommendations.
Quote:
Originally Posted by vacationtime247
Bought the Caprice wagon for $1k. Really don't want to spend more than another $1k on the conversion. Would like to get that money back after @30k miles in fuel savings.
|
Oh I know and fully agree. It costs nothing to look around to see if a cheap NV3500 donar is laying around in a field. Plus you would be surprized how much free local help you can get sometimes if you start asking around, use craigslist and do a little digging. A project like this is best done with lots of beer and plenty of time and some good friends.
Anyway I have seen many low cost 6.2 MT conversions, some under $250 and being a GM vehicle you would be amazed at how much stuff can be standard between the MT and auto in the 1990's vehicles.
Also I just know that if you go the 6.2 route the vehicle will be much more enjoyable/functional as a manual. At least mine seems to be.
Quote:
Originally Posted by vacationtime247
Then on top of that when it comes time to sell the car. Hmmm... wonder if there'd be any market for Caprice diesel conversions?
VT247
|
Like anything, build it for yourself and keep the cost low, if you figure on selling the thing good luck. There is a market for anything but with the economy the way it is not much of a market.
Never know though....
A big car that gets north of 30mpg would attract some attention.
Anyway I don't mean to be a nag, I just would like to see you look around a little before going the auto route. You might be surprized with a little luck.
But that said, if you can't find the parts in a reasonable amount of time, do it up as an Auto and keep us posted, I and many others here would like to see a SUCESSFUL swap like this done.
Not to mention if you do your own work (or have friends to help) you can always drop an NV3500 in for the auto later if/when you find parts at the right price.
Happy swapping.