View Single Post
Old 05-08-2012, 09:10 AM   #13 (permalink)
euromodder
Master EcoModder
 
euromodder's Avatar
 
Join Date: Jul 2010
Location: Belgium
Posts: 4,683

The SCUD - '15 Fiat Scudo L2
Thanks: 178
Thanked 652 Times in 516 Posts
Quote:
Originally Posted by Vekke View Post
The mixing instruction to engine oil was 1.4 grams to quart or 0.946 liter (read one liter).
I'll stick to 1g/L or even 1g/kg

Quote:
Best way to mix it is to pour about half of oil inside the engine and put the powder into the oil canister. Close the cap and shake well. I first put powder to full oil canister and it did not mix enough...
I have half a bottle left over, so I can prepare the fresh oil

Quote:
That stuff will go also to some of my customers cars who are willing to take the risk of engine failure.
As long as we're not adding too much, I don't expect a problem.
Back in the days a lot of people used liqui-moly Molybdene Sulfide, which was essentially some base oil + MoS2 powder.
__________________
Strayed to the Dark Diesel Side


Last edited by euromodder; 05-08-2012 at 01:36 PM..
  Reply With Quote