Should be done assembling the prototype by Friday!
One of the 3 phase bars:
From left to right, B+ bar, B- bar, phase 1, 2, and 3 bars. No risk of mixing those up! haha:
I missed my calling as the crappiest photographer in the world. Sorry so blurry. this is how they will lay against the base plate:
Excuse me, but I believe I ordered the large baseplate. Later I'm going to mill channels in it for water cooling. For now I'll just use it as is for testing.
Everything but the base plate and bus bars:
Control board removed:
High side driver removed:
Power board only! Some big friggen film caps. 450v 100uF each.
