Quote:
Originally Posted by bschloop
the fairing work is coming along steadily, and I will hopefully be working on a mold for the tail in a couple of weeks. I need to put an order in for some Fiberglass and Resin, and that usually takes about a week for shipping. I will again be using the UV cure resin, and I think I will use 10oz cloth to build up the mold. looking at the shape it seems that a three piece tail will work nicely. two separate lower pieces, and a lid. it will also need at least one internal piece to cover the wheel, as well as mounting points for attachment to the cycle.
|
Too bad we weren't able to collaborate earlier, I have a huge roll of fiberglass I would get rid of for cheap, I could have brought it to mid Ohio with me. Well, if you ever get down this way again...
Now you got me curious about these peltier units. i'm going to have to check them out.