Quote:
Originally Posted by ChazInMT
Here's a drawing I did a while back for another Ranger, the back is probably taller than you thought it'd be.
Here's a full size image for more detail. Same Pic Bigger |
Chaz, I got it right at 10.5 inches just in front of the tailgate. Down to parallel with the top of the bed at the point where the tailgate is when it is down, 2 feet further back. This gives me the capability to carry 8 foot sheets of plywood, inside the enclosed bed with the cap in place. Thanks for the illustration. I think you will find I followed it closely. My truck looks like it sits higher in the rear than the one in your picture. Might do something about that later but for now I am going to focus on the aero part.
regards
Mech