Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

wriley4409 · 01-17-2013, 06:47 PM

I finally was willing to back off of the mod long enough to get before and after pictures of my scangauge. I was able to measure a drop from .42 gallons per hour at 550 rpm to .38 gph at just under 500 rpm. This is an improvement of about 10%. I accomplished this mod by adjusting tables within the ECU/PCM with a handheld programmer.

01-17-2013, 06:47 PM	#11 (permalink)
wriley4409 EcoModding Lurker Join Date: Dec 2007 Location: Central Arkansas Posts: 33 Thanks: 0 Thanked 2 Times in 2 Posts	I finally was willing to back off of the mod long enough to get before and after pictures of my scangauge. I was able to measure a drop from .42 gallons per hour at 550 rpm to .38 gph at just under 500 rpm. This is an improvement of about 10%. I accomplished this mod by adjusting tables within the ECU/PCM with a handheld programmer. Attached Thumbnails Last edited by wriley4409; 01-17-2013 at 06:57 PM..