View Single Post
Old 11-06-2013, 04:37 PM   #2 (permalink)
t vago
MPGuino Supporter
 
t vago's Avatar
 
Join Date: Oct 2010
Location: Cedar Rapids, IA
Posts: 1,766

The Karen-Mobile - '05 Dodge Magnum SXT
Team Dodge
90 day: 26.72 mpg (US)

Fiat Dakota - '00 Dodge Dakota SLT RWD Quad Cab
90 day: 16.67 mpg (US)

The Red Sled - '01 Dodge Durango SLT 4WD
90 day: 16.96 mpg (US)
Thanks: 799
Thanked 682 Times in 437 Posts
Quote:
Originally Posted by malko05 View Post
Hello,

Newbie in the fabulous world of eccomoder, and MPGuino, I would like to ask some help.

Last Week I bought a MPGuino for my 1998' Fiat Punto 55s 1.1L SPI. I install it. But there is a problem: On each display , speed, L/KM , Volt , there is a significant variation in the values displayed (~+10% - 10% every ~5s) . Then I try to only read the Voltage (engine and ignition Off) and there is still a lot of fluctuation.

The second problem is that the L/H is only shown in idle. If I accelerate very slowly , the value increases normally (but with the same fluctuations) , but at midrange , it reboot . If I accelerated faster (usually done while driving ) , the screen freezes , and I need to unplug and plug again to reactivate

I have some video on youtube to explain that, but, as a newbie, i'm not able to show it to you !!!


Sorry for my bad english writing ! and thank you...
You can post the rest of the YouTube link, after the "=" sign, to show us.

What code version of MPGuino are you using?
__________________
The Fiat Dakota


The Karen-mobile


The Red Sled
  Reply With Quote