Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 03-14-2014, 12:35 PM

Including shipping, the 6 igbts were right around $400. 3*133 is around $400, so that's just dividing up the cost of them among 3 people. No one should have more than $133 removed from their bank account when all is said and done. If both flores and duncan send jedsmd $133, then all 3 of you will be out $133. Jedsmd sends me the IGBTs, and then I send out 3 controllers, with 3 IGBTs per controller. That leaves me with 3 left over when all is said and done. I had planned on donating all 6 of the ones I have, but now I have an extra 3 at the end, so I'm more than happy!

03-14-2014, 12:35 PM	#6307 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	Including shipping, the 6 igbts were right around $400. 3133 is around $400, so that's just dividing up the cost of them among 3 people. No one should have more than $133 removed from their bank account when all is said and done. If both flores and duncan send jedsmd $133, then all 3 of you will be out $133. Jedsmd sends me the IGBTs, and then I send out 3 controllers, with 3 IGBTs per controller. That leaves me with 3 left over when all is said and done. I had planned on donating all 6 of the ones I have, but now I have an extra 3 at the end, so I'm more than happy! __________________ kits and boards Last edited by MPaulHolmes; 03-14-2014 at 12:54 PM..*