Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - CarBEN EV5 Full Sized Prototype Construction

NeilBlanchard · 07-26-2014, 07:37 PM

After several hours of work today, I got the wiper system almost into place.

The firewall has several holes in it that will need to be filled in from the inside. The base of the 'A' pillars need to be built up - both to cover the holes needs to clear the ends of the push rods, and to make the ends of the vent bezel flush. I put the nose and the hood into place and the hood will need some more work to get it to fit over the bezel.

The 'A' pillars are a lot straighter than they used to be but I still see some wobbles ...

07-26-2014, 07:37 PM	#632 (permalink)
NeilBlanchard Master EcoModder Join Date: May 2008 Location: Maynard, MA Eaarth Posts: 7,907 Mica Blue - '05 Scion xA RS 2.0 Team Toyota 90 day: 42.48 mpg (US) Forest - '15 Nissan Leaf S Team Nissan 90 day: 156.46 mpg (US) Number 7 - '15 VW e-Golf SEL TEAM VW AUDI Group 90 day: 155.81 mpg (US) Thanks: 3,475 Thanked 2,950 Times in 1,844 Posts	After several hours of work today, I got the wiper system almost into place. The firewall has several holes in it that will need to be filled in from the inside. The base of the 'A' pillars need to be built up - both to cover the holes needs to clear the ends of the push rods, and to make the ends of the vent bezel flush. I put the nose and the hood into place and the hood will need some more work to get it to fit over the bezel. The 'A' pillars are a lot straighter than they used to be but I still see some wobbles ... __________________ Sincerely, Neil http://neilblanchard.blogspot.com/