Hi Guys
Finally got the courage to tackle the scary PiCkit
All went well
until I got
Warning ------.hex contains code that is located at addresses that do not exist on the 11AA010
----- is the location I had saved the file that Paul sent me
I'm still a little unsure about the wiring to the PiCkit
On the board the first pin was not connected to anything (the furthest into the board)
I have treated this as the pin furthest from the triangle on the piCkit
So I have wired the pin on the board (had a blue wire on it) to the pin next to the arrow
The next one to that to the next pin (purple)
The next one to that to the next pin (grey)
The next one to that to the next pin (white)
The next one to that to the next pin (black)
I have a power light and a blue active light on the PiCkit
|