Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

duncan · 11-19-2014, 12:27 AM

Hi Paul
I turned the wee blue cube thing clockwise

It's magic!
The tires slip on take off - then grip
I think I could even use the 1200amps -
But that's for later,
I'm hitting up to about 800 battery amps now!

Great!

There is a motorsport event in Christchurch on the 30th November
Evolocity » eMotorsport
I'm entered - now I'm good to go!

Thanks for all of the help - now lets go and see if I can keep up with a Tesla

I'm using Headways - 16Ah (nominally but they are actually a good bit less)
With four strings of 40 cells
So about 130v
They are 10C continous - 640 amps
and 15C burst - 960 amps
But they do saaaag

11-19-2014, 12:27 AM	#6936 (permalink)
duncan EcoModding Apprentice Join Date: Oct 2010 Location: southland NZ Posts: 153 Thanks: 38 Thanked 86 Times in 55 Posts	Hi Paul I turned the wee blue cube thing clockwise It's magic! The tires slip on take off - then grip I think I could even use the 1200amps - But that's for later, I'm hitting up to about 800 battery amps now! Great! There is a motorsport event in Christchurch on the 30th November Evolocity » eMotorsport I'm entered - now I'm good to go! Thanks for all of the help - now lets go and see if I can keep up with a Tesla I'm using Headways - 16Ah (nominally but they are actually a good bit less) With four strings of 40 cells So about 130v They are 10C continous - 640 amps and 15C burst - 960 amps But they do saaaag