Quote:
Originally Posted by Chrysler kid
Awesome, can you take a picture of the cylinder head numbers directly next to the coolant outlet on the head. On my y5 the numbers are upside down which has a few of the other moderators on h-t confused but I believe the y5 heads were given this designation to seperate them as solid roller heads.
There should also be a year stamped on the head next to the dip stick to indicate the year the head was made
Be sure to clean that intake manifold from stem to stern to clear out that egr passage way
|
I will get that picture for you right now.
Head is getting stripped, hot tanked, new valve stem seals and re-assembled.
The egr passage on the head is very full of crap. I haven't pulled the plate on the intake yet but will certainly clean that too!