I thought at first attach the cover food to origuinal cover.
with screws like this :
http://ecomodder.com/forum/showthrea...tml#post264302
or pasting like this :
http://ecomodder.com/forum/showthrea....html#post5714
I stole the covers nissan . I covers food fastened with screws to the rim. like this :
http://ecomodder.com/forum/showthrea...tml#post190285
I remain so :
on deck . mark an X mark and drill two holes three millimeters .
think about making four holes. for more resistance.
check the rim to make holes . to cover and rim use a punch and hammer. not to slip the bit. and no fence to one side.
after making the holes in the rim. five millimeters . I threaded with a male six millimeters .
use M6x10 screws. galvanized . wide brim.
I made the holes six point five (6.5 ) millimeters to the deck. and replace the cover .
to put the screws . 'Four millimeters between the rim and the tire . tighten the screws. will deform a little cover . and I remain good.
It was getting dark . tomorrow I'll have more photos.