Alright y'all! I'm getting ready to design a kammback and use the upper radiused edge as described above. I'm still in the preliminary stages of planning, but there is some things I've already got in plan:
- The overall design is to follow the Template as close as possible. The kammback will lead into the boattail later, so this is critical.
- The real world design I want to try and copy is off of the Toyota Prius' rear hatch, but with a more radiused end as is on Phil's CRX.
- It will be able to pivot so the rear hatch can open.
The biggest things I am encountering in opposition is the frame material, how to get the slope correct and how to securely attach it.
Here is a side view of a design. Ignore the bottom section of the incomplete boattail
