I figured out what was wrong with getting lean burn to work today! I am bleeding voltage going from the
PCM to the MAF. Since the computer is still seeing the usual voltage, nothing is happening. It needs to be the other way around. This will tell the computer there is less air going into the engine and cut the fuel down, effectively leaning out my AFRs. Only thing is that I can only remain in LB mode for 3-6 minutes at a time before the PCM catches on. A quick coast/DFCO period and I get a few more minutes in
It will be like an Insight with manual NOX purge cycles
The only thing that stopped me today was my solder gun has gone missing
Hopefully I can find it sometime this week and get this thing working! I know I am keeping my fans in suspense
