[TimV]

I finaly found some time to install the heater.

The result of the first day ( got like 6h of time) is the installation of the heaterhousing in the cooling system. And get the cooling system airbleeded. After this i went shopping :P

The second day i got almost everyting of the electrical system wired up. ( I had like 2h time)

The location of the relay, it is now all wired up (no new pic, cause it was dark)


Location of the heater. The tube that is connected to the plastic side of the heaterhousing was normally connected to the inlet of the cabin heater.


And some electrical connections at the heater


Things that needs to get done ( tomorrow ):
Lay the power cable from the alt to the fuse and from the fuse to the relay.
Lay the cable from the switch in the cabin to the relay.

And it should work!

( photo's will be uploaded tomorrow!)