Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Controller mods or build for E-assist altermotor

freebeard · 03-30-2017, 07:32 PM

I decline the role of ex-spurt.

My understanding is that HSD uses magnets buried in the laminations to counter back-EMF that develops toward the top of the rpm range.

I retain this stuff for a short while after reading it. Two big fat wires is DC, three big fat wires is poly-phase DC which is sort of a half-wave AC. Or something.

Sorry.

03-30-2017, 07:32 PM	#60 (permalink)
freebeard Master EcoModder Join Date: Aug 2012 Location: northwest of normal Posts: 28,696 Thanks: 8,144 Thanked 8,924 Times in 7,367 Posts	I decline the role of ex-spurt. My understanding is that HSD uses magnets buried in the laminations to counter back-EMF that develops toward the top of the rpm range. I retain this stuff for a short while after reading it. Two big fat wires is DC, three big fat wires is poly-phase DC which is sort of a half-wave AC. Or something. Sorry.