|
I doublechecked every solder very carefully and they are all good.
I get a little bit of current between two of the claws on the voltage regulator, but confirmed that I didn't short it. Is that normal?
Some of the pins in my iDuino seem to let some current from one pin to the next, but again I confirmed that I didn't short it. Is that normal?
What I'm beginning to believe is that my LCD is broken. I used a little superglue in putting this thing together and it corroded a little of the black frame on the LCD and I fear that this could have somehow eaten on the innards of the LCD. Maybe? I could certainly order another one.
|