Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

59Morris · 02-26-2019, 06:54 PM

Hi,
I'm new to the forum, and have been reading through the messages looking for help with the AC controller commands. Awhile back MPaulHomes mentioned adding "Help" to the command structure. IE: "help motor-type" to get additional information. I tried this on my newly purchased controller only to get an "Invalid Command".
Where can I find a list of the commands with basic descriptions of what each means? For instance what is Motor-Type 1 vs 2, 3 and 4?

My hope here is to build a controller to replace the Curtis 1239 144V in my EV conversion. The goal is to get more power out of the HPEVS AC51 motor and maybe, must maybe.... be able to switch over to the Netgain Hyper9.

02-26-2019, 06:54 PM	#3350 (permalink)
59Morris EcoModding Lurker Join Date: Feb 2019 Location: California Posts: 9 Thanks: 5 Thanked 0 Times in 0 Posts	Controller Command help. Hi, I'm new to the forum, and have been reading through the messages looking for help with the AC controller commands. Awhile back MPaulHomes mentioned adding "Help" to the command structure. IE: "help motor-type" to get additional information. I tried this on my newly purchased controller only to get an "Invalid Command". Where can I find a list of the commands with basic descriptions of what each means? For instance what is Motor-Type 1 vs 2, 3 and 4? My hope here is to build a controller to replace the Curtis 1239 144V in my EV conversion. The goal is to get more power out of the HPEVS AC51 motor and maybe, must maybe.... be able to switch over to the Netgain Hyper9.