Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 06-18-2019, 12:40 AM

Hi Goan! Could you email me at pandspowerelectronics@gmail.com, and I can email you what I have. I don't know how to post things on a website.

Thanks Thingstodo!

Faltig, could you post a picture of the board? The normal control board just has GR1 to GR10 for the gate resistors (22 Ohm usually). 10 Ohm each would be bad. That means 10 in parallel is 1 Ohm total, but the gate driver can do maybe 12 amp peak maybe, and that would be 12amp peak, which is the absolute max it can handle.

06-18-2019, 12:40 AM	#7298 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	Hi Goan! Could you email me at pandspowerelectronics@gmail.com, and I can email you what I have. I don't know how to post things on a website. Thanks Thingstodo! Faltig, could you post a picture of the board? The normal control board just has GR1 to GR10 for the gate resistors (22 Ohm usually). 10 Ohm each would be bad. That means 10 in parallel is 1 Ohm total, but the gate driver can do maybe 12 amp peak maybe, and that would be 12amp peak, which is the absolute max it can handle. __________________ kits and boards