This is what I skeched about a month ago for minding the rules .
Use an extended cab short bed. This wluld alow moving the seat back to give me some leg room . Then mod the floor to form the duct through the front bulkhead.
The part above the open tailgate is the Bonneville spoiler.
The duck face to the right is a front view of the truck . The blue mock up was a twin flat bed sheet, to give me an approximation of what the shrink wrap will look like.
What I see as ideal would be to turn the contour inside out. A shot without the CAD hood scoop it is aloud 11"tall at the center line and 11" eather side of center.
What the inside will look like when the wight pice is finished.
7°taper=9:1. 3-6"R at the IC core.
__________________
1st gen cummins 91.5 dodge d250 ,HX35W/12/6 QSV
ehxsost manafulld wrap, Aero Tonto
best tank: distance 649gps mi 24.04 mpg 27.011usg
Best mpg : 31.32mpg 100mi 3.193 USG 5/2/20
Former
'83 GMC S-15 Jimmy 2door 2wd O/D auto 3.73R&P
'79 Chevy K20 4X4 350ci 400hp msd custom th400 /np205. 7.5-new 14mpg modded befor modding was a thing
87' Hyundai Excel
83 ranger w/87 2.9 L FI2wd auto 18mpg on the floor
04 Mitsubishi Gallant 2.4L auto 26mpg
06 Subaru Forrester XT(WRX PACKAGE) MT AWD Turbocharged 18 plying dirty best of 26mpg@70mph
95Chevy Blazer 4x4 auto 14-18mpg
04 Chevy Blazer 4x4 auto 16-22mpg
|