Quote:
Originally Posted by Piotrsko
The reason they ask you to thin it is to improve flow qualities such that it "flattens out" the roller / brush marks. A <5% thinner addition wont alter the characteristic of the paint
|
I know it is not a big admixture of thinner, and I understood its purpose. But I was not certain how even 5% would affect the heat rejection, which is the functional point. But you give me more reason to sand and thin and apply a third coat if I dislike the look enough and tests show little cooling improvement.
Xist, it is just clear coat... therefore the paint color is an instant match.