Thread: PCM Tuner
View Single Post
Old 10-01-2020, 03:20 PM   #5 (permalink)
racprops
Master EcoModder
 
Join Date: Oct 2009
Location: Phoenix AZ
Posts: 682
Thanks: 4
Thanked 41 Times in 34 Posts
Quote:
Originally Posted by Keito View Post
I think you'll have to head over to Moates and do some research.
For my 86 Dodge Omni race car I have a Moates Burn 2 that I burn my
own "chips" to mount on the logic module
I had to replace the original chip with a socket, then I burn calibrations to the chips and mount them in the socket.
It appears you could use the Roadrunner burner for 96 and up GM vehicles

GM 1996-present : Moates.Net


After a little searching I found an interesting lean burn thread on BITOG
https://www.bobistheoilguy.com/forum...e-them.208298/
Getting into and reprogramming OBDII is Much harder that the older systems.

WOW that www.bobistheoilguy.com thread was a real find...I joined and am posting there already, THANKS.

Rich
  Reply With Quote