View Single Post
Old 09-12-2021, 09:30 PM   #18 (permalink)
freebeard
Master EcoModder
 
freebeard's Avatar
 
Join Date: Aug 2012
Location: northwest of normal
Posts: 28,972
Thanks: 8,222
Thanked 8,995 Times in 7,431 Posts
I looked again:
Quote:
ARES GravityLine’sTM fixed motor, chain-drive system
Sounds more like a cable car, but close enough. I was thinking about minimizing the length of the road.

en.wikipedia.org/wiki/Rack_railway#Locher_(1889)
Quote:
The Locher rack system, invented by Eduard Locher, has gear teeth cut in the sides rather than the top of the rail, engaged by two cog wheels on the locomotive. This system allows use on steeper grades than the other systems, whose teeth could jump out of the rack. It is used on the Pilatus Railway.

Locher set out to design a rack system that could be used on gradients as steep as 1 in 2 (50%). The Abt system — the most common rack system in Switzerland at the time — was limited to a maximum gradient of 1 in 4 (25%).

Oregon City, OR, would be my candidate. They have one of the eight municipal elevators in the world. en.wikipedia.org/wiki/Oregon_City_Municipal_Elevator

Sounds like a job for the Boring Company.
__________________
.
.
Without freedom of speech we wouldn't know who all the idiots are. -- anonymous poster

________________
.
.
Because much of what is in the published literature is nonsense,
and much of what isn’t nonsense is not in the scientific literature.
-- Sabine Hossenfelder
  Reply With Quote