|
I'm thinking Creality cr-10 and build it up to run nylonX for prints subjected to heat and shock.
A typical 220x200 and 300mm tall one does most of what I can think if making, but a 300x300 and 400mm tall one does most everything in the plane I would want to do it in.
It looks like I live in the ideal climate to do nylon
__________________
1984 chevy suburban, custom made 6.5L diesel turbocharged with a Garrett T76 and Holset HE351VE, 22:1 compression 13psi of intercooled boost.
1989 firebird mostly stock. Aside from the 6-speed manual trans, corvette gen 5 front brakes, 1LE drive shaft, 4th Gen disc brake fbody rear end.
2011 leaf SL, white, portable 240v CHAdeMO, trailer hitch, new batt as of 2014.
|