Quote:
Originally Posted by Christ
If you can't handle the chemicals responsibly, please DON'T handle them at all.
Obviously, obtain and understand the MSDS for ANY material you're working with, BEFORE you obtain the chemical itself.
Please perform any tests in accordance with state and federal law, and don't get yourself blown up.
|
Just thought I'd reiterate those points.
Safety equipment for these chemicals might include something along the lines of nitrile/neoprene coated safety gloves (never use latex with petroleum based products or any solvents)
Gas-exchanger mask, or respirator of some sort.
Full face-shield
non-absorbent apron and sleeve liners, with the gloves INSIDE the sleeves.
Note: These are the VERY LEAST precautions you should take.
If you're not willing to properly protect yourself, I'd prefer you just ignored everything I've posted about this subject.
EDIT - If you don't know what chemical you're handling - treat it as though it's nuclear. It could be dihydrogen monoxide (water), but it could also be something much more dangerous. Better to err on the side of personal safety, and the safety of those who might be affected by your mis-judgement.