|
Measured to chasis ground I've got 11.8 V on each pin... All 3. I retouched the solder on pin 2, still 11.8, 11.6, 11.6 on each pin.. When I measure pin 1 and 3 with 2 as my ground I get 0.0...
Once again, the MPGuino still works great under PC power...
I just did the ohm check on the 7805 -
1 2 3
1 8.38 8.78
2 Inf 10.12
3 Inf 5.6
So is my 7805 Bad?
__________________
Last edited by Wingmn; 12-29-2008 at 12:07 PM..
|