EcoModder.com - Diesel_Dave's Album: DIY Ram Cold Air Intake

Recent Posts / Pics

65+ Efficiency Mods

100+ Hypermiling Tips

Glossary

		EcoModder Forum > Diesel_Dave's Profile > Albums
DIY Ram Cold Air Intake

DIY Ram Cold Air Intake

Pics of my DIY cold air intake project

Here's the finished view from the outside after I spray-painted the pipe with some PVC-compatible black paint. As you can see, it's hidden very well.

Here's what the "pre-filter" looks like in the airbox.

I sandwiched the furnace filter piece between the toilet flange and a piece of plywood. The 3 bolts are the same ones that hold the toilet flange to...

I used this as a "pre-filter" to catch any insects and pieces of debris that might find their way in. It's a piece of an old washable furnace filter...

Finished view from outside the truck. I think I may get some PVC-compatible black spray paint so it "hides" the pipe some more. Right now, though,...

View from underneath the truck a the "downpipe". The airbox is up and the bumper is to the left. I used two 45 deg elbows rather than one 90 deg...

View from underneath the truck, looking vertically up at the airbox. The front of the truck is towards teh bottom of this pic. The pipe is 3"...

View inside the airbox with the filter removed so you can see the toilet flange attached to the bottom of the airbox. You're looking directly...

View of the bumper from the from with the boot attached and the stock fog lamp grille hole back in place. I did have to trim the back of the gille...

View of the bumper from the from with the boot attached and the stock fog lamp hole grille removed so you can see better.

View from the back side of the bumper (with it off the truck). This is a plastic and rubber "boot" that's used in construction for when you send a...

Web
Analytics