Go Back   EcoModder Forum > jomelmaldonado's Profile > Albums > Warm Air Intake
Register Now
 Register Now
 

Picture 5 of 9 from Album Warm Air Intake
View of the muffler adapters and the aluminum sheet. The muffler adapters are held in place to the aluminum sheet with a coat hanger wire and a hose clamp holds the tube to the engine. The wire seen in the elbow acts like a pin so the engines vibration and movement doesn't pulls out the steel tube. I made this mod as low budget as possible, and it works fine and serves it's function. It cost me less than 20 bucks.
View of the muffler adapters and the aluminum sheet. The muffler adapters are held in place to the aluminum sheet with a coat hanger wire and a hose clamp holds the tube to the engine. The wire seen in the elbow acts like a pin so the engines vibration and movement doesn't pulls out the steel tube. I made this mod as low budget as possible, and it works fine and serves it's function. It cost me less than 20 bucks.
Picture Added 08-10-2009 12:44 AM
Added by jomelmaldonado


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com