Go Back   EcoModder Forum > EcoModding > Instrumentation
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 05-17-2022, 05:03 PM   #1 (permalink)
EcoModding Lurker
 
Join Date: May 2022
Location: Scotland
Posts: 6
Thanks: 2
Thanked 5 Times in 4 Posts
Ins.MPG wrong on OBDII scanner (via Dashcommand)

So! Got an interesting problem here!

Dashcommand is reporting that my instantaneous MPG is absurdly high (in the hundreds of mpg at 60mph on the motorway, I doubt it!). What confuses me is that the average MPG reported by dashcommand pretty much matches the dashboard display - its just the instantaneous MPG reading that's off!

I've tried to confirm it by cross referencing it against torque - at which point the instantaneous MPG is much lower than what the car reports - but, again, the overall average matches what the car's dashboard says.

Has anybody else had similar problems?

Ps - I'll contact the folks who make DashCommand at some point - was just curious if it was a common problem!

  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 05-18-2022, 01:57 PM   #2 (permalink)
EcoModding Lurker
 
Join Date: May 2022
Location: Scotland
Posts: 6
Thanks: 2
Thanked 5 Times in 4 Posts
Ah, Brake Specific Fuel Consumption (BSFC) and/or volumetric efficiency are likely wrongly set - just need to dial them in... However that's done...

...To the forums! ��

  Reply With Quote
Reply  Post New Thread


Thread Tools




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com