Quote:
Originally Posted by revolt13
Could you point me to the best 5v source to tie into? Switched if possible, if not then point me to a good 5v source anddd a switched ground? Thanks jellybean! Will have it up and running by this weekend.
|
Confused as to why you need to hook up to 5V? The input power to the MPGuino should be 12V that is on all the time.
(Input power has a diode drop then a regulator so input voltage needs to be 8V or greater.)
Or are you looking to power something else that is +5V fed from my MPGuino board?
__________________
1992 Geo Metro, 1.0L 5spd, 435,000 miles on the original engine and trans!
- knuckles/hubs/brakes/13" wheels from a 2000 Metro
- running 175 70R13
- averaging 51.7 MPG, 56.9MPG best tank.
- self built MPGuino
-
http://www.dschmidt.com/MPGuinoJBD.html