EcoModder.com

EcoModder.com (https://ecomodder.com/forum/)
-   OpenGauge / MPGuino FE computer (https://ecomodder.com/forum/opengauge-mpguino-fe-computer.html)
-   -   MPGuino wiki (https://ecomodder.com/forum/showthread.php/mpguino-wiki-4852.html)

MetroMPG 08-30-2008 05:58 PM

MPGuino wiki
 

>> MPGuino wiki - EcoModder
<<

Might as well sticky this so people can help it grow...

dcb 09-08-2008 07:48 AM

A thought on wiki organization.

We might want separate pages for different vehicles, then you can expand on that vehicle, and have a section for hookup location pictures and specifics and any anomalies/faq for that vehicle. Otherwise the mpguino page might start looking like the release one thread.

Any other thoughts?

SVOboy 09-08-2008 10:47 AM

That makes sense. I see us eventually having pages for vehicles for other stuff to, so MPGuino could be on of the anchored sections for each vehicle.

ptsmith24 09-08-2008 12:08 PM

Who was supposed to set up a vehicle specific section on the wiki (for MPGuino setup, general FE mods, etc.)? I know there was a thread not too long ago about it. I can help out with that, along with a FAQ/Troubleshooting section for the MPGuino.

ptsmith24 09-08-2008 06:09 PM

I've gone through the first two pages of the thread and updated the wiki with a Troubleshooting/FAQ section. It may be necessary to split up that section into subsections as it grows. I'll finish more of it later. I just wanted to get a little bit in there. Feel free to edit it if you don't like the setup/formatting. :)

dcb 09-08-2008 06:19 PM

Thanks! I tweaked the LCD section :)

dcb 09-11-2008 08:55 AM

Ok, Added a Metro page w/installation pictures and linked to it from the vehicle table rather than dup the info. Lets see how that works.

dcb 09-23-2008 08:15 AM

Added a calibration page:

Mpguino calibration - EcoModder

ptsmith24 09-23-2008 09:30 AM

Two Questions:

Are all these additions (Metro, calibration, etc.) going to be linked to from the Main Page?

Also, should the numbers for the few cars we do have be moved to the calibration page rather than the main MPGuino page? Or should it be on both?

ac7ss 09-26-2008 03:04 PM

I have started a page for Mazda. (I figured that a brand specific page would be better than a model/year page) All that is there is the hookup and current numbers for MPGuino on my truck, but the framework is there for more.

Perhaps make the numbers just on the calibration page (easier to update.)


All times are GMT -4. The time now is 01:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com