Quote:
Originally Posted by watt-a-mezz
Hi,jyanof. Good to hear your controller is holding up. Have ordered ,by way of wifes good graces, the control board and parts for my own controller project. Wanted to ask if your bus bars all point the same way, and if I could build it that way without harming anything. Also was thinking of a thin baseplate and heatsink, with 2 12v computer fans. Keep us posted, Watt.
|
Now that I'm home, I took a picture of the new controller. Yes, all 3 bus bars go out the same direction and I made some bus 'adapter' bars so that the lugs didn't interfere. I did something similar with the Curtis, and no problems so far.
