Duct tape wheel covers and other possible cheap alternatives

[California98Civic]

Pop that center cap out and see if that provides some mounting possibilities.

[freebeard]

Tap threads into the bores, two left-handed and two right. Fine threads.

[mpg_numbers_guy]

Here's what I ended up doing (link):

[19bonestock88]

You really should consider making a joke to check air pressure... could maybe use a rubber hole plug to seal it up

[mpg_numbers_guy]

Originally Posted by 19bonestock88

You really should consider making a joke to check air pressure... could maybe use a rubber hole plug to seal it up

The cheapest rubber plugs I could find were like $8 for 10...and these wheel covers were basically free. Trying to see if I can mock up a DIY version. Not that $8 is a big chunk of change or anything, but part of the fun is seeing how low cost one can make the mods.