LCD Instrumentation for Cougar Controller

[harlequin2]

Originally Posted by MPaulHolmes

My new atmega168 board doesn't have CAN, but I have a different board that's dsPIC based that does have CAN. But CAN can haha be added to the atmega168 with what djbecker did.

What's the best way to prepare a erohw? Filleting might be a bit extreme!

[Freyguy]

Originally Posted by harlequin2

What's the best way to prepare a erohw? Filleting might be a bit extreme!

I'm pretty sure a erohw is suppose to be eaten raw, like sushi........


(Sorry, I couldn't resist)

[MPaulHolmes]

Oh dang, that was good.

[harlequin2]

Originally Posted by Freyguy

I'm pretty sure a erohw is suppose to be eaten raw, like sushi........


(Sorry, I couldn't resist)

But I never did like oysters, so perhaps its not for me.
Paul, what have you been up to?

[MPaulHolmes]

I fixed the mill today! and then a bunch of other stuff that is relevant to the LCD monitoring system too! Bam! I'm back on topic!

[Freyguy]

Hey guys,
Just wanted you to know that I've finished & tested my final firmware update for this project. As I mentioned earlier this includes additional peukert values of 1.15,1.10 and 1.05, as well as a pretty cool "autodisplay" mode.
This helps alleviate the need to contantly press the momentary switch to see relevant information while driving. Autodisplay still allows the pushbutton to work as before, and it is an option you can disable during configuration if you prefer the original mode.

Also, I've passed all updated files to sawickm and as soon as he return the download links I'll post them here.

Quick demo below-

http://www.youtube.com/watch?v=za4najnTP-g

[harlequin2]

Looking good.

Advice from PCBCART says board delivery expected March 10. Probably take a few days to get here and then a few more for me to post them off to those who have ordered one/some.
Anyone else needing one, get in quick they are nearly all gone.

[Freyguy]

Thanks LouMan!
I figured you'd like the auto display mode since you were the one that mentioned you'd probably leave it on the SOC screen while driving. I just wanted to give you the best of both worlds

[Freyguy]

As promised, here are the latest files-
1. CougarLCD_firmware_v1.1.zip (231.7 KB bytes) => https://www.onlinefilefolder.com/1svI0qCjUPXWfr

2. CougarLCD_Artwork_Rev_0.zip (100.0 KB bytes) => https://www.onlinefilefolder.com/1s3QIX5Q08LwAm

3. CougarLCD_Config_Rev_0.zip (618.8 KB bytes) => https://www.onlinefilefolder.com/1s0uRYWa6qR6xn

4. CougarLCD_PCB_Assy_Rev_0.zip (888.4 KB bytes) => https://www.onlinefilefolder.com/1sWj4A3kcscpoG

5. CougarLCD_PCB_BOM_Rev_0.zip (43.2 KB bytes) => https://www.onlinefilefolder.com/1s0jBuUnLtlaiN

6. CougarLCD_Schematic_Rev_0.zip (40.4 KB bytes) => https://www.onlinefilefolder.com/1sMfw2lGZGvJwW

7. CougarLCD_User_Manual_Rev_0.zip (221.4 KB bytes) => https://www.onlinefilefolder.com/1sZmzqhC0tFQeH

The schematic, artwork(gerber) and PCB assembly instruction files remain the same, but everything else is updated including firmware.

Once the Wiki is fixed, the files will be placed there.
Many thanks to Sawickm for making this happen

[jackbauer]

Got all the bits from mauser and the lcds turned up today. Now all i need are pcbs !!