This mod shouldn't take anyone more than 10 minutes to complete from start to finish.
Licence placement mod:
This is how it looked prior to mod, notice how it stuck out a little under the bumper, you could
see a bend in the metal becuase of the air pushing against it all the time...
This is with the plate/holder off, if I didn't censor my plate number, you can see the old screws and the little screw I made, I simply used the old screw to "drill" a hole in the bumper with the screwdriver, it wasnt hard to do at all.
This is the final result, the licence is flat against the bumper and no parts of it are sticking out anywhere.