Suggestions on an impact wrench

[me and my metro]

I have an inexpensive 3/4" drive impact for big truck lug nuts and Honda crank bolts.

[Xist]

I only had the head bolts screech on my Subaru. Those only required a breaker bar, but the sound was thoroughly unnerving!

[hamsterpower]

In for another vote for the breaker bar combo.
and NEVER buy any air tools at home depot! just a warning.

[Daox]

I met up and borrowed my cousin's 1/2" and 3/4" impact for the job. The not so great 1/2" impact (sanborn rated for 600ft/lbs) didn't do the job. I'm not sure the IR 231C would do it either at this point. So, I'll be trying the 3/4" impact next. I just need to get a 3/4" to 1/2" reducer and put a larger hose quick disconnect on the compressor.

[ksa8907]

Only penetrating oil worth using.

[metroschultz]

http://www.amazon.com/Ingersoll-Rand...ords=2135TiMAX

This is what I use.

[Daox]

Originally Posted by ksa8907

Only penetrating oil worth using.

That is also what I use. Good stuff.

[iveyjh]

If you are still looking this is on sale

1/2 in. Professional Air Impact Wrench

[star_deceiver]

This is the largest one of the 3 I use at work. It only gets used on bolts 5/8" and larger as it will strip or shear a half inch bolt if you're not careful.

https://www.milwaukeetool.com/power-...rdless/2764-20