Go Back   EcoModder Forum > EcoModding > Hypermiling / EcoDriver's Ed
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 09-02-2018, 02:51 PM   #1 (permalink)
Master EcoModder
 
mechman600's Avatar
 
Join Date: Jul 2008
Location: Langley, BC
Posts: 1,228

Fusion - '16 Ford Fusion Hybrid SE
Thanks: 190
Thanked 275 Times in 168 Posts
Coaxing a 4L60E into Better FE

I have a 2004 Chevy Colorado with a 4L60E. Here's what I have found in order to get the TC locked up as early as possible.
- When shifted into 'D' first TC lockup occurs in 4th (top) gear at 80 km/h (50 mph)
- When shifted into '3' first TC lockup occurs in 3rd gear at 60 km/h (37 mph)
- Once the TC has locked it will stay locked as low as 67 km/h in 4th gear (when shifted into 'D') and 52 km/h when shifted into '3'; if speed drops below these thresholds, vehicle must be driven above 60 km/h in '3' or 80 km/h in 'D' in order for the TC to once again lock.
-Under light acceleration: 1-2 shift occurs at 20 km/h, 2-3 at 39 km/h, 3-4 at 58 km/h; once shifted into 4th gear, it will stay in 4th as low as 52 km/h.

What this all means is that if I want to drive at 70 km/h, the TC will never lock on its own unless I first shift into '3', wait a second for TC lockup, and then shift back into 'D'.

It also means that between 52-68 km/h I have a choice between 4th gear TC unlocked and 3rd gear TC locked. With 4th gear TC unlocked, engine RPM is slightly lower, but possibly at the expense of TC inefficiency. Since my ScanGage was stolen, I don't what is more efficient.

The results have been exceptional - FUEL LOG


Last edited by mechman600; 09-02-2018 at 03:16 PM..
  Reply With Quote
The Following User Says Thank You to mechman600 For This Useful Post:
hayden55 (09-06-2018)
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 09-02-2018, 03:05 PM   #2 (permalink)
Master EcoModder
 
Join Date: Jun 2016
Location: KY
Posts: 1,351

IGL - '04 Saturn Ion
Team Saturn
90 day: 56.19 mpg (US)
Thanks: 63
Thanked 365 Times in 268 Posts
Can the truck be tuned for earlier shifting and TQ lock? A lot of GM stuff is tunable via HPTuners, EFILive, etc...
__________________
My current Ecotec project...


My last Ecotec project...
  Reply With Quote
Old 09-02-2018, 03:18 PM   #3 (permalink)
Master EcoModder
 
mechman600's Avatar
 
Join Date: Jul 2008
Location: Langley, BC
Posts: 1,228

Fusion - '16 Ford Fusion Hybrid SE
Thanks: 190
Thanked 275 Times in 168 Posts
Oh probably. But I'm interested in using what I have to its full potential.
Quote:
Originally Posted by 19bonestock88 View Post
Can the truck be tuned for earlier shifting and TQ lock? A lot of GM stuff is tunable via HPTuners, EFILive, etc...
  Reply With Quote
Old 09-03-2018, 09:02 PM   #4 (permalink)
Master EcoModder
 
Join Date: May 2012
Location: Tampa, FL
Posts: 1,745

Volt, gas only - '12 Chevrolet Volt Premium
90 day: 38.02 mpg (US)

Volt, electric only - '12 Chevrolet Volt Premium
90 day: 132.26 mpg (US)

Yukon Denali Hybrid - '12 GMC Yukon Denali Hybrid
90 day: 21.48 mpg (US)
Thanks: 206
Thanked 420 Times in 302 Posts
What kind of driving do you do? Highway, city, mix? Speed limits?

Mods will differ depending on expected driving conditions.

Easiest for highway would be either larger tires or a gear change.
__________________




  Reply With Quote
Old 09-03-2018, 09:38 PM   #5 (permalink)
Master Ecomadman
 
arcosine's Avatar
 
Join Date: Nov 2010
Location: Chicago area
Posts: 1,149

sc1 - '98 saturn sc1
Team Saturn
90 day: 43.17 mpg (US)

Airplane Bike - '11 home built Carp line Tour

rans - '97 rans tailwind

tractor - '66 International Cub cadet 129

2002 Space Odyssey - '02 Honda Odyssey EX-L
90 day: 28.25 mpg (US)

red bug - '00 VW beetle TDI

big tractor - '66 ford 3400

red vw - '00 VW new beetle TDI
90 day: 58.42 mpg (US)

RV - '88 Winnebago LeSharo
90 day: 16.67 mpg (US)
Thanks: 20
Thanked 333 Times in 225 Posts
You can install a manual switch to lock the converter at any speed or gear, it should be in series with the first gear solenoid as not to stall the engine when stopped. Google it, there are tutorial videos on the subject.
__________________
- Tony

  Reply With Quote
The Following 2 Users Say Thank You to arcosine For This Useful Post:
hayden55 (09-06-2018), mechman600 (09-04-2018)
Old 09-06-2018, 11:25 AM   #6 (permalink)
Master Novice
 
elhigh's Avatar
 
Join Date: Jan 2008
Location: SE USA - East Tennessee
Posts: 2,314

Josie - '87 Toyota Pickup
90 day: 29.5 mpg (US)

Felicia - '09 Toyota Prius Base
90 day: 50.48 mpg (US)
Thanks: 427
Thanked 616 Times in 450 Posts
I just looked at your fuel log. That's a terrific jump in fuel economy for no cost. I mean - it's a 14% jump over your previous tank, that's huge.
__________________




Lead or follow. Either is fine.
  Reply With Quote
Old 09-09-2018, 08:15 PM   #7 (permalink)
Master EcoModder
 
mechman600's Avatar
 
Join Date: Jul 2008
Location: Langley, BC
Posts: 1,228

Fusion - '16 Ford Fusion Hybrid SE
Thanks: 190
Thanked 275 Times in 168 Posts
Quote:
Originally Posted by ksa8907 View Post
What kind of driving do you do? Highway, city, mix? Speed limits?
Mods will differ depending on expected driving conditions.
Easiest for highway would be either larger tires or a gear change.
I'm really not interested in mods here - that's not what this thread is about. Besides, the TC can be locked using the methods above at the lowest speed that I would ever want to do it at. I can cruise at 66 km/h (41 mph) at 1200 RPM all locked up.

Quote:
Originally Posted by elhigh View Post
I just looked at your fuel log. That's a terrific jump in fuel economy for no cost. I mean - it's a 14% jump over your previous tank, that's huge.
Don't pay attention to that last tank - that was a highway trip with lots of slower cruising speeds. I probably touched the brake a total of ten times the entire tank.

I just ordered a WIFI OBD2 adapter to run the Torque app for testing. But since I don't have it yet, here's the question:

What is more efficient at 60 km/h (37 mph) - 3rd gear/TC locked/1500 RPM (higher RPM/low drivetrain loss) OR 4th gear/TC unlocked/1400 RPM (lower RPM/more drivetrain loss)? How much efficiency is lost through an unlocked torque converter at low loads?

Last edited by mechman600; 09-09-2018 at 09:39 PM..
  Reply With Quote
Old 09-09-2018, 09:23 PM   #8 (permalink)
Master Novice
 
elhigh's Avatar
 
Join Date: Jan 2008
Location: SE USA - East Tennessee
Posts: 2,314

Josie - '87 Toyota Pickup
90 day: 29.5 mpg (US)

Felicia - '09 Toyota Prius Base
90 day: 50.48 mpg (US)
Thanks: 427
Thanked 616 Times in 450 Posts
Determining what's more efficient is a tough call but you'll be able to figure it out once you've hooked up the adapter and fired up the app. Torque Pro has a fuel rate setting; whichever is lowest (set your gear, set your cruise control, then run your test route again in the other gearing but without resetting the cruise control) is your winner.

I am going to take an educated guess and say 3rd/locked is your better bet. It's 1.00/1 so straight through, no or less gearing losses, and no TC losses. I think a lower duty cycle on the injectors will make up for the higher engine speed.

__________________




Lead or follow. Either is fine.
  Reply With Quote
Reply  Post New Thread






Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com