Go Back   EcoModder Forum > EcoModding > DIY / How-to
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 05-10-2008, 07:17 PM   This thread is in the EcoModder Project Library | #1 (permalink)
Legend in my own mind
 
trikkonceptz's Avatar
 
Join Date: Apr 2008
Location: Homestead, Fl.
Posts: 927

Evil Pumpkin - '08 Scion xD RS 1.0 #1633
90 day: 35.45 mpg (US)

Silent Silver Killer - '10 Honda Insight EX
90 day: 51.5 mpg (US)
Thanks: 2
Thanked 14 Times in 13 Posts
DIY Vibe Grille / Fog Deletes

Well had the chance to day to remove the tape and work in the 90+ degree heat, (Mistake#1). So I went to Home Depot and picked up some 10" x 10ft, aluminum roofing material to make my grille and fog deletes. Here was my journey.

This was all I needed as far as materials. The aluminum, a pair of shears, a sharpie, some rivets, a rivet gun, and something to make a template with. I had some abs plastic laying around.


Using my template material I made the template for the fogs first.

Once cut I taped them on the vehicle for fitment.

Now because my bumper is FUBAR, I decided to rivet the piece into it. It turned out to be real easy, but will leave permanent damage in the long run via drilled holes ... So a couple minutes of drilling and riveting and the first side is done.

Because the two sides are mirror images I simply cut two pieces at once and flipped it over for the other side, so basically rinse and repeat ..

Now I got lucky in that the same 10" piece fit as a main grille block, so I took a piece and laid it over for general sizing and held it in place with tape to get the best placement.

Once cut properly I used the same method, drill and rivet all along the sides until the side was complete. Now because of he compound curve and the deformed bumper these pieces may never sit flat unles they are flat. So expect some waviness as I have. I personally think that imperfection does not out weigh its benefit, but only time will tell.

And as before I cut 2 pieces at the same time, so I simply flip the other over and repeated the steps.

All in all the project took 2 hours, with multiple breaks to get out of the sun ... Cost of the project was less than $20 and I hope the returns continue as they have with the tape. Now as a final mod I am having some red vinyl cut to fit over the panels to not make them as obvious as they are.
Funny enough last night a cop pulled me over thinking the blue tape meant the vehicle was unsafe to drive. Once I explained myself he apologized and applauded my efforts. LOL

Since I had some spare time left from this project, I decided to gut the vibe a bit more for maximum weight benefit to my limits ... Enjoy ..

__________________
Thx NoCO2; "The biggest FE mod you can make is to adjust the nut behind the wheel"

I am a precisional instrument of speed and aeromatics
If your knees bent in the opposite direction......what would a chair look like???





  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 05-11-2008, 04:31 AM   #2 (permalink)
Pokémoderator
 
cfg83's Avatar
 
Join Date: Dec 2007
Location: Southern California
Posts: 5,864

1999 Saturn SW2 - '99 Saturn SW2 Wagon
Team Saturn
90 day: 40.49 mpg (US)
Thanks: 439
Thanked 530 Times in 356 Posts
trikkonceptz -

Wow, butch grill blocks AND major weight reduction. I salute you!!!!!!

CarloSW2
__________________

What's your EPA MPG? Go Here and find out!
American Solar Energy Society
  Reply With Quote
Old 05-11-2008, 09:02 AM   #3 (permalink)
Dartmouth 2010
 
SVOboy's Avatar
 
Join Date: Nov 2007
Location: Hanover, NH
Posts: 6,447

Vegan Powa! - '91 Honda CRX DX
Team Honda
90 day: 66.52 mpg (US)
Thanks: 92
Thanked 122 Times in 90 Posts
Send a message via AIM to SVOboy Send a message via MSN to SVOboy Send a message via Yahoo to SVOboy
Looking forward to pictures with the red vinyl!
  Reply With Quote
Old 05-17-2008, 05:22 PM   #4 (permalink)
Legend in my own mind
 
trikkonceptz's Avatar
 
Join Date: Apr 2008
Location: Homestead, Fl.
Posts: 927

Evil Pumpkin - '08 Scion xD RS 1.0 #1633
90 day: 35.45 mpg (US)

Silent Silver Killer - '10 Honda Insight EX
90 day: 51.5 mpg (US)
Thanks: 2
Thanked 14 Times in 13 Posts
Well another day off and another chance to hack at the vibe. Today I added the vinyl tp the aluminum to make it less obvious and began step one of shaving the door handles ... I say step one because the fronts are easy, I could not for the life of me figure out how to remove the rears ... ANyone with a vibe, Matrix or bodyshop know how help me get the rears off?

Thank you and enjoy ..

__________________
Thx NoCO2; "The biggest FE mod you can make is to adjust the nut behind the wheel"

I am a precisional instrument of speed and aeromatics
If your knees bent in the opposite direction......what would a chair look like???





  Reply With Quote
Old 05-18-2008, 10:01 AM   #5 (permalink)
Administrator
 
Daox's Avatar
 
Join Date: Dec 2007
Location: Germantown, WI
Posts: 11,203

CM400E - '81 Honda CM400E
90 day: 51.49 mpg (US)

Daox's Grey Prius - '04 Toyota Prius
Team Toyota
90 day: 49.53 mpg (US)

Daox's Insight - '00 Honda Insight
90 day: 64.33 mpg (US)

Swarthy - '14 Mitsubishi Mirage DE
Mitsubishi
90 day: 56.69 mpg (US)

Daox's Volt - '13 Chevrolet Volt
Thanks: 2,501
Thanked 2,585 Times in 1,553 Posts
Well now, I missed this thread initially. Looks a lot better with the vinyl on it. Sorry, no clue on removing handles.
__________________
Current project: A better alternator delete
  Reply With Quote
Old 05-18-2008, 10:18 AM   #6 (permalink)
Dartmouth 2010
 
SVOboy's Avatar
 
Join Date: Nov 2007
Location: Hanover, NH
Posts: 6,447

Vegan Powa! - '91 Honda CRX DX
Team Honda
90 day: 66.52 mpg (US)
Thanks: 92
Thanked 122 Times in 90 Posts
Send a message via AIM to SVOboy Send a message via MSN to SVOboy Send a message via Yahoo to SVOboy
Nice red vinyl,
  Reply With Quote
Old 05-18-2008, 01:46 PM   #7 (permalink)
EcoModding Apprentice
 
TheDon's Avatar
 
Join Date: Feb 2008
Location: Davenport,FL
Posts: 214

Pepper - '87 Mercedes Benz 300D
90 day: 30.42 mpg (US)
Thanks: 0
Thanked 0 Times in 0 Posts
how do you open the doors?
  Reply With Quote
Old 05-18-2008, 09:39 PM   #8 (permalink)
Legend in my own mind
 
trikkonceptz's Avatar
 
Join Date: Apr 2008
Location: Homestead, Fl.
Posts: 927

Evil Pumpkin - '08 Scion xD RS 1.0 #1633
90 day: 35.45 mpg (US)

Silent Silver Killer - '10 Honda Insight EX
90 day: 51.5 mpg (US)
Thanks: 2
Thanked 14 Times in 13 Posts
Quote:
Originally Posted by TheDon View Post
how do you open the doors?

Please note this is my single passenger commuter car. That being said all doors still open from the inside and for now I am not removing the DS front door handle. In the upcoming weeks I will add an extra selinoid I have to the my DS door in order to open it with a popper, just like on my xB. The other doors will remain manual from the inside. I rarely take any passengers at all, for me it was key ..
__________________
Thx NoCO2; "The biggest FE mod you can make is to adjust the nut behind the wheel"

I am a precisional instrument of speed and aeromatics
If your knees bent in the opposite direction......what would a chair look like???





  Reply With Quote
Old 05-18-2008, 09:48 PM   #9 (permalink)
EcoModding Apprentice
 
TheDon's Avatar
 
Join Date: Feb 2008
Location: Davenport,FL
Posts: 214

Pepper - '87 Mercedes Benz 300D
90 day: 30.42 mpg (US)
Thanks: 0
Thanked 0 Times in 0 Posts
ah, I figured that or thought the vibe windows would go down like my old VR6 did
  Reply With Quote
Old 06-06-2008, 11:52 PM   #10 (permalink)
Believe the HYPErmiler
 
Join Date: May 2008
Location: Downhill
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post
Who needs door handles when they have the Jaws of Life only a few more minutes away?

  Reply With Quote
The Following User Says Thank You to OneBadBird For This Useful Post:
ali2015 (05-03-2013)
Reply  Post New Thread


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Full Grille Block: Upper Grille DifferentPointofView Aerodynamics 12 02-28-2008 10:14 AM



Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com