Electric coolant water pump

From EcoModder Forum Wiki
Jump to: navigation, search

Back to main mod page

Introduction
Auto manufacturers are moving towards electric pumps for steering and cooling.

Aftermarket retrofits are available for some engines, though the gains are likely to be had only where they are computer controlled so power use is continually optimized based on engine temperature.

Instructions for mod

Hope there is a aftermarket electric replacement for your application.
Then once you decide how to install the water pump you have to figure out what you are going to do with the belt that was driving the pump. Some after market electric water pump kits have an idler on the electric pump. Most of the time you just have to get creative.
Then you have to find a way to wire it up. A key on power supply is best that way you cant forget to turn the pump on or accidently turn it off while driving. It is highly recommended that you use the "key on" power supply to work a relay and have the relay actually power the pump.

User experiences

Please enter your user name and any relevant data in the table

User data
User Name Car Make, Model, Year Cost of Mod Time to Perform Mod MPG Before Mod MPG After Mod MPG improvement guess Instruction Link
Example Data Saand Example Data Mazda, 626, 1991 Example Data $5 USD Example Data 1 Hour Example Data 27.2 Example Data 29.8 User mod detail or measurement detailed data


Problems / Consequences of mod

- If modification is performed incorrectly this could result in overheating, localised hot spots and therefore engine damage - Idle reduction, you can use a high power coolant heater to warm the engine while the engine is not running.

References

Forum thread links

Electric water pump 2
DIY electric water pump
electric water pump ewp80
Toyota corolla water pump, what capacity electric
OEM electric water pump control strategy
Electric water pump
electric water pump effect on warm up times

External links