06-03-2016, 09:52 AM
|
#91 (permalink)
|
MPGuino Supporter
Join Date: Oct 2010
Location: Hungary
Posts: 1,807
iNXS - '10 Opel Zafira 111 Anniversary Suzi - '02 Suzuki Swift GL
Thanks: 830
Thanked 708 Times in 456 Posts
|
Give me a more realistic figure, then. This is what I used to arrive at my figure.
And I got the base power draw numbers here -> Ecomodder: MetroMPG -> List of "typical" electrical loads in a modern car
I took out all of the intermittent loading, as well as stuff I don't even have (throttle-by-wire, for instance). Even assuming no blower motor, LEDs at all exterior running lights and all interior lights, and no radio, I still arrive at 35 amps at a bare minimum.
Edit: Hm... maybe replace my blower motor resistor with some sort of PWM motor driver... that's an idea. Ought to cut down on the blower motor consumption.
|
|
|
Today
|
|
|
Other popular topics in this forum...
|
|
|
07-13-2016, 02:58 AM
|
#92 (permalink)
|
Corporate imperialist
Join Date: Jul 2011
Location: NewMexico (USA)
Posts: 11,266
Thanks: 273
Thanked 3,569 Times in 2,833 Posts
|
Everything you could want to know about alternators:
Generators | Automotive Electricity and Electronics
__________________
1984 chevy suburban, custom made 6.5L diesel turbocharged with a Garrett T76 and Holset HE351VE, 22:1 compression 13psi of intercooled boost.
1989 firebird mostly stock. Aside from the 6-speed manual trans, corvette gen 5 front brakes, 1LE drive shaft, 4th Gen disc brake fbody rear end.
2011 leaf SL, white, portable 240v CHAdeMO, trailer hitch, new batt as of 2014.
|
|
|
07-25-2016, 01:02 AM
|
#93 (permalink)
|
EcoModding Lurker
Join Date: Mar 2015
Location: California
Posts: 92
Thanks: 10
Thanked 19 Times in 17 Posts
|
Hi, all. Long time, no see. I dumped the bike over on its side from a slick spot on the road, so it's down for a couple weeks while I order new parts. Fortunately, no major injuries on me, just a couple small scrapes.
On to the topic at hand, has anyone considered a microswitch connected to the bottom of the accelerator pedal? In our car, the pedal can tilt, so if you push on the top of it with your toe, the pedal will pivot without moving the actual throttle linkage.
That could be used as an alternator disconnect... when the accelerator pedal isn't depressed (such as during coasting), the alternator is charging. When the accelerator pedal is depressed, the alternator is cut out. In my thinking, the microswitch would go to a solid state relay which cuts on and off the alternator field windings.
If you're on a long road trip and absolutely need to charge, it'd be a simple matter to adjust your foot so the pedal is pressed from the bottom, which would tilt the accelerator pedal back to its resting (undepressed) position and energize the alternator field windings.
|
|
|
07-25-2016, 01:51 AM
|
#94 (permalink)
|
Corporate imperialist
Join Date: Jul 2011
Location: NewMexico (USA)
Posts: 11,266
Thanks: 273
Thanked 3,569 Times in 2,833 Posts
|
Disconnecting the field does hardly anything
Most of the drive power going to the alternator is expended pushing air around.
__________________
1984 chevy suburban, custom made 6.5L diesel turbocharged with a Garrett T76 and Holset HE351VE, 22:1 compression 13psi of intercooled boost.
1989 firebird mostly stock. Aside from the 6-speed manual trans, corvette gen 5 front brakes, 1LE drive shaft, 4th Gen disc brake fbody rear end.
2011 leaf SL, white, portable 240v CHAdeMO, trailer hitch, new batt as of 2014.
|
|
|
|