MPGuino Parts list

[snydertalon]

I pulled the partslist out of the release one thread, and its the only listing I have found that seems to be "here you go, buy this" and then i found issues.

list source : http://ecomodder.com/forum/showthrea...pace-2115.html

Arduino - going to get an actual one because i could only find the idunio for 20+45 shipping

list
2 5.1v zener diodes - 5.1v Zener diode
what wattage?

1 2n3906 PNP Transistor - 2n3906
i was just going to get the first one

1 220 ohm resistor - 220 resistor
found several, but what wattage

2 100k resistors - 100k resistor
see above

3 tactile switches
- SWT6-V3RD
probably just 3 of these





thanks for your help with the recomended wattages

[wikityler]

The resistors and diodes are being used in a signal function not power, so almost any wattage will do. 1/4W resistors are the most common. A 1/2W diode will be fine. The first PNP will be fine, as will those switches.