MPGuino Local Installers List

[AndrzejM]

I can help anybody from Poland to install MPGuino

[War_Wagon]

Someone on the forum contacted me last year about installing one. I helped him out, then he disappeared. But if you are in the Vancouver area let me know and we can figure it out, I am no expert but if I can help you out I will.

[Davinator61]

I am a Graduate (June 2007) from Renton Technical College's Automotive Technology Course (3.75 Cumulative GPA), and live in the Kent/Auburn/Federal Way area of Washington State, USofA. I have purchased an MPGuino for my own use, and, once I've installed and tested it in my own vehicle (1991 Jeep Cherokee Laredo 4.0L), I may be interested in installing the same unit for ANYONE living in the Central Puget Sound Region, especially if you can't afford to buy a Scanguage II or equivalent, or have an Older-Than-1996 vehicle. Please PM me if any of yous live in my area and are interested in my services.

[SpeedyCorky]

I need some help installing a MPGuino in my 2006 Honda Insight


where do i tap into the wheel speed sensor?
where to i tap into the injector sensor?


and what calibration values should i start with?

[wolydotmatrix]

Looking to purchase 1 MPGuino. Who? and where?

Thanks
-Adam-

[meelis11]

Originally Posted by wolydotmatrix

Looking to purchase 1 MPGuino. Who? and where?

Thanks
-Adam-

Hi,
check my signature below this post. there is a link.

Meelis

[Sven7]

Anyone in Southeast Michigan (Detroit area) currently that would be willing to install one in an OBD-0 Civic? I haven't bought an MPGuino and will not until I know I can get it installed. I will pay you!

Also willing to drive a couple hours (mini road trip) do get it done.

Thanks, Tyler

[Baltothewolf]

I doubt I'll ever get lucky, but anyone in SoCal that is able to install one in a 95 Camry would be great. I'm willing to pay a good chunk of change if you live within 75 miles (each way).

[tf4624]

anyone in Atlanta Georgia Area...will be in the area for a while..

[H-Man]

I'm likely going to end up offering this service soon. I am partial to making the connections in the ECU for harder to reach harnesses or harnesses that are rare (my prizm/corolla makes tapping the harness a no go without removing a bunch of parts compared to just removing the ECU and I can get an ECU cheaper than a new harness.) It looks like most cars are a bit easier to tap the injector and VSS sensor.