Go Back   EcoModder Forum > EcoModding > Motorcycles / Scooters
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 03-02-2014, 04:57 PM   #1 (permalink)
EcoModding Apprentice
 
Join Date: Feb 2010
Location: Howells Ne
Posts: 126

Supra - '88 Toyota Supra

superhawk - '98 Honda superhawk
Last 3: 27.62 mpg (US)

Lesabre - '96 buick lesabre
3800
90 day: 25.85 mpg (US)

Saturn - '97 Saturn Sc2
Team Saturn
Sports Cars
90 day: 39.12 mpg (US)

Truk - '99 Ford F150
Team Ford
Pickups
90 day: 24.43 mpg (US)

Golf - '03 Vw Golf
90 day: 38.57 mpg (US)
Thanks: 17
Thanked 7 Times in 6 Posts
98 Superhawk

I have a 98 honda superhawk and want to get better fuel mileage without ruining the way it looks so I want to start by changing the rear sprocket.
I have already gone from a 16 to 17 tooth sprocket on the front and put on a 39 from the stock 41 but can't find anything smaller any ideas?
Thanks
Jon

  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 03-02-2014, 05:13 PM   #2 (permalink)
Master EcoModder
 
Join Date: Jul 2011
Location: WI
Posts: 473
Thanks: 157
Thanked 77 Times in 55 Posts
I think that may be about it.

A 1000cc twin is only going to do so well in the MPG department no matter what you do. If you really want good numbers sell it and buy a CBR250R.

Otherwise just have fun with it.
  Reply With Quote
Old 03-02-2014, 05:46 PM   #3 (permalink)
EcoModding Apprentice
 
Join Date: Feb 2010
Location: Howells Ne
Posts: 126

Supra - '88 Toyota Supra

superhawk - '98 Honda superhawk
Last 3: 27.62 mpg (US)

Lesabre - '96 buick lesabre
3800
90 day: 25.85 mpg (US)

Saturn - '97 Saturn Sc2
Team Saturn
Sports Cars
90 day: 39.12 mpg (US)

Truk - '99 Ford F150
Team Ford
Pickups
90 day: 24.43 mpg (US)

Golf - '03 Vw Golf
90 day: 38.57 mpg (US)
Thanks: 17
Thanked 7 Times in 6 Posts
I enjoy my big vtwin too much to ride anything else but I know the engine could be spinning allot slower and still pull hills good and i can always downshift if it doesn't. I would like to get down to 30 teeth on the rear
  Reply With Quote
Old 03-02-2014, 06:37 PM   #4 (permalink)
Master EcoModder
 
mechman600's Avatar
 
Join Date: Jul 2008
Location: Langley, BC
Posts: 1,228

Fusion - '16 Ford Fusion Hybrid SE
Thanks: 190
Thanked 275 Times in 168 Posts
I had a '97 Superhawk. Awful awful awful on fuel. A tiny fuel tank doesn't help for range. All I can say is good luck.
Gear it WAY higher and try to keep the revs very low, relying on the gobs of torque it has to spare. Very very difficult to do, considering how amazing that engine sounds at high revs!
  Reply With Quote
Old 03-02-2014, 07:29 PM   #5 (permalink)
Master EcoModder
 
Join Date: Jan 2011
Location: na
Posts: 1,025
Thanks: 277
Thanked 218 Times in 185 Posts
VT1000f made my short list, but the little tank nixed it for me as well. Narrowed down to used FZ1 or new Bandit 1100. FZ1 won for me. Nephew had a SV1000 fun ride, not a lot to do with your Hawk, don't worry about the gearing, look for good deals on tires, they cost about as much per mile as gas. And insurance.
  Reply With Quote
Old 03-09-2014, 05:15 PM   #6 (permalink)
EcoModding Lurker
 
Join Date: Aug 2013
Location: West Wales,UK
Posts: 88
Thanks: 16
Thanked 57 Times in 24 Posts
Quote:
I have already gone from a 16 to 17 tooth sprocket on the front and put on a 39 from the stock 41 but can't find anything smaller any ideas?
I took a quick look at JT sprockets website on your behalf, there is an 18 tooth front sprocket available which has the same fitting dimensions as the superhawk, catalogue number JTF 339. I can't say for sure if there will be enough clearance for the larger sprocket, JTS are very helpful it might be worth asking their advice.

Regards,
Ironside.
  Reply With Quote
Old 03-11-2014, 05:51 PM   #7 (permalink)
EcoModding Lurker
 
American Viking's Avatar
 
Join Date: Jan 2014
Location: NJ, for a little bit longer..
Posts: 81

Dad's Jetta - '05 Volkswagen Jetta 2.5l package one
90 day: 23.23 mpg (US)

Black Cherry - '01 Honda VFR800fi
Last 3: 39.39 mpg (US)
Thanks: 0
Thanked 13 Times in 10 Posts
Quote:
Originally Posted by Ironside View Post
I took a quick look at JT sprockets website on your behalf, there is an 18 tooth front sprocket available which has the same fitting dimensions as the superhawk, catalogue number JTF 339. I can't say for sure if there will be enough clearance for the larger sprocket, JTS are very helpful it might be worth asking their advice.

Regards,
Ironside.
If the 18 will fit without hitting the cases or the guides, I'd go with that.
16/41 is a 2.563
17/39 is a 2.294 or 11% less revs
18/39 is a 2.167 or 18% less revs

If you want more efficiency, than that, you'll have to re-jet and/or downsize the carbs.
Then the only thing you can really do after that is reduce friction and weight (both rotating and non-rotating).

This would be a good bike to consider - Ecotrons EFI conversions on it. Probably could use the EFI Throttle Bodies off an RC51.
__________________
JohnS

Black Cherry (no epa ratings)


Dad's Taxi


The Lead Sled (EV conversion coming soon)

Last edited by American Viking; 03-11-2014 at 06:33 PM..
  Reply With Quote
Old 03-11-2014, 08:40 PM   #8 (permalink)
Master EcoModder
 
Join Date: Jul 2011
Location: WI
Posts: 473
Thanks: 157
Thanked 77 Times in 55 Posts
Quote:
Originally Posted by American Viking View Post
If the 18 will fit without hitting the cases or the guides, I'd go with that.
16/41 is a 2.563
17/39 is a 2.294 or 11% less revs
18/39 is a 2.167 or 18% less revs

If you want more efficiency, than that, you'll have to re-jet and/or downsize the carbs.
Then the only thing you can really do after that is reduce friction and weight (both rotating and non-rotating).

This would be a good bike to consider - Ecotrons EFI conversions on it. Probably could use the EFI Throttle Bodies off an RC51.
Or you could just get something that started off getting big numbers - like a CBR250.

You will never overcome that much more displacement/power than is required to propel a typical motorcycle at a moderate speed.

Just have fun with it, because there's really no reasonable way to make it get seriously high MPG numbers.
  Reply With Quote
Old 03-11-2014, 09:33 PM   #9 (permalink)
EcoModding Lurker
 
American Viking's Avatar
 
Join Date: Jan 2014
Location: NJ, for a little bit longer..
Posts: 81

Dad's Jetta - '05 Volkswagen Jetta 2.5l package one
90 day: 23.23 mpg (US)

Black Cherry - '01 Honda VFR800fi
Last 3: 39.39 mpg (US)
Thanks: 0
Thanked 13 Times in 10 Posts
Quote:
Originally Posted by jkv357 View Post
Or you could just get something that started off getting big numbers - like a CBR250.

You will never overcome that much more displacement/power than is required to propel a typical motorcycle at a moderate speed.

Just have fun with it, because there's really no reasonable way to make it get seriously high MPG numbers.
Some of us would kill a cbr250 and don't want to just buy a new or another bike.. I can add my luggage to a Superhawk and still go touring on it, much like with my VFR.
That's not something I can do with a cbr250.
The OP already has a Superhawk and is not chomping at the bit for another bike, so why not make useful suggestions.

I'd bet that with the right parts you can get descent mileage from it.
Sure its a large-ish V-twin, but that doesn't meant it can't operate more efficiently than it did when it left Honda's factory.
__________________
JohnS

Black Cherry (no epa ratings)


Dad's Taxi


The Lead Sled (EV conversion coming soon)
  Reply With Quote
Old 03-11-2014, 09:43 PM   #10 (permalink)
Master EcoModder
 
Join Date: Jul 2011
Location: WI
Posts: 473
Thanks: 157
Thanked 77 Times in 55 Posts
Quote:
Originally Posted by American Viking View Post
Some of us would kill a cbr250 and don't want to just buy a new or another bike.. I can add my luggage to a Superhawk and still go touring on it, much like with my VFR.
That's not something I can do with a cbr250.
The OP already has a Superhawk and is not chomping at the bit for another bike, so why not make useful suggestions.

I'd bet that with the right parts you can get descent mileage from it.
Sure its a large-ish V-twin, but that doesn't meant it can't operate more efficiently than it did when it left Honda's factory.
He didn't say he wanted to add luggage and go touring, he said he wanted better mileage. If mileage is a concern, riding a BIG (1000cc) V-Twin isn't a great choice.

Getting into major mods like you suggested in order to get slightly better mileage from a 1000cc motorcycle is not a useful suggestion.

I think my comment of "just ride it and have fun" is a useful suggestion.

  Reply With Quote
Reply  Post New Thread


Thread Tools




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com