Is this the Civic inj. power wire?

[t vago]

Originally Posted by bobo333

i havnt got an SG or MPGuino yet but if i do get them how can i hook them up so that they read right when i flick the killswitch?

Don't know about the SG, but the current MPGuino code will correctly handle this. That was one of many improvements made to the code.

[P-hack]

K, I did the common power injection kill. Works reasonably well (small switch on the shifter and an automotive relay connected to 4+4 spades).

It does make the check engine light come on till the next power cycle, but it is a 94 so I don't care. I guess fooling the ECU without rebooting it completely is the other option, this will do for now

[j12piprius]

Originally Posted by brucepick

Found the inj. power wire.
It's in the connector in photo but not the fat yellow + black wire noted earlier.

It's yellow + black, the top position, center column (as shown in photo with connector clipped to bracket).

Nice.

What method did you use for the splices, and how is it working for you?