Official MPGuino preassembled now available

[bungie4]

Thanks so much for doing this open source!

I plan on installing into my 2011 CBR250R (motorcycle). I'll update how I make out with it.

[live4soccer7]

Are they still being shipped? Can anyone confirm this before I send off $55? Thanks.

[MetroMPG]

Originally Posted by bungie4

Thanks so much for doing this open source!

I plan on installing into my 2011 CBR250R (motorcycle). I'll update how I make out with it.

When you do the installation, it'd be great if you post a thread.

Aside from this thread ( http://ecomodder.com/forum/showthrea...-fi-17125.html ) , I haven't seen anyone put one on a motorcycle.

(Though I might have just missed the news.)

[dcb]

cautionary tale on the motorcycles, the numerous tiny pulses from the abs sensor are not compatible w/a stock guino. You need something in the 3000-5000 pulses per mile range as is typical in car speed sensors. You might have to get creative http://ecomodder.com/forum/showthrea...s-13293-5.html

Live4soccer, yah, they are moving rather slowly these days due to too much going on (school starting up, etc), but they are being shipped.

[bungie4]

Originally Posted by dcb

cautionary tale on the motorcycles, the numerous tiny pulses from the abs sensor are not compatible w/a stock guino. You need something in the 3000-5000 pulses per mile range as is typical in car speed sensors.

I did a little more research into this (thanks for the heads up!). It seems my Honda has a true VSS mounted to the gearbox just behind the cylinder. In fact, it seems most honda's have this. So I'm hoping I can forgo tapping into a reducing the signal from the ABS.

Right now it's looking like the hardest part is going to be fabbing up a mounting box and mount. (I just jinxed myself didn't I).

I plan on doing up a full install report with photo's but the weather here is starting to turn so it might be a long winter project. I have access to some bit twiddlin' hardware guys who do remote operated mining equipment, and, I'm a programmer (going on 30 years now). I figure we should be able to git'r done.

-Steve

[jkbrigman]

Hi All;
I'm confused: I can't seem to find current information on the MPGuino: I understand there's been a v1 and v2, but the opengauge site seems to still be showing the pre-v1 model in the images. I drive a 1996 Mazda B2300.

I'm skilled with Arduino and DIY in general, but I just can't seem to tell enough what's going on with the MPGuino that I'm not sure if there's anything more I can find out, or just pay the cash and get going...

Thoughts and feedback anyone?
Thanks!
JKB

[aaronyancy13]

Just checking to see if you guys received my donation for the pre assemble mpguino, my name is Aaron Yancy.

[live4soccer7]

Yes, I would love to purchase one, but would like to know the status of who is putting them out before sending money.

[dcb]

There's a slight backlog at the moment. It will get cleared shortly.

[PaulCB]

Hi,

Made my donation 10 days ago but still no feedback on it being posted. Where do I sit in the backlog?

Thanks
Paul